Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short and simple guide, you will learn how to drain and replace the coolant in a Honda CBR650F, following the instructions below. First, place your bike on a stand and start unscrewing the coolant drain bolt, allowing it to flow into a container for about ten minutes; then unscrew the radiator cap, removing the plastic fairing first, as shown in the video. At this point, top up with the new fluid suitable for your radiator, then reassemble the fairing!

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Honda CBR 650F
How to Replace the Air Filter on the Honda CBR 650F
Cbr 650f Today, discover the main instructions on how to remove and replace the engine air filter on the Honda CBR 650F motorcycle. First, place your motorcyc…
How to Replace the Clutch on the Honda CBR 650F?
How to Replace the Clutch on the Honda CBR 650F?
Cbr 650f To replace the clutch on the Honda CBR 650F, loosen the bolts securing the transmission cover, which is located on the right side of the bike in the …
How do you replace the exhaust pipe of the Honda CBR 650F?
How do you replace the exhaust pipe of the Honda CBR 650F?
Cbr 650f In order to replace the exhaust pipe of the Honda CBR 650F, you need to loosen the screws that fix the fairings in the front lower part of the bike, …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos