Do it yourself
Frequently asked questions about cars and motorcycles
As you can see in this tutorial, changing the engine oil in the Yamaha FZ6 600 is an extremely simple and quick task. First, ensure the engine is cool enough. Then, position a container underneath the bike, locate the drain bolt, and loosen it using a 17 mm spanner. Allow all the oil in the system to drain out, then remove the old filter using pliers or a strap wrench, and tighten the replacement. Finally, reassemble everything and pour the required amount of oil through the designated opening.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz6 Fazer In this video, you will learn how to remove and replace the engine air filter on a Yamaha FZ6 Fazer, which is also valid for the FZ6. First, remove t…
Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …
Fz6 Fazer In this video, you will see the instructions for removing and replacing the starter motor on a Yamaha FZ6 Fazer. First, remove the seat of your motor…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos