Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant in the Yamaha FZ6 Fazer

Model: Yamaha Fz6 Fazer
Part: Antifreeze coolant

Video tutorial

This guide shows you how to drain and refill the engine coolant of the Yamaha FZ6 Fazer motorcycle. First, place the bike on its centre stand and start unscrewing the drain screw on the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap and refill with new antifreeze, as shown in the video.

Ensure you fill it to the maximum level, then start the engine and top up if necessary!


Updated on 23 September 2026 by ScegliAuto


Related tutorials

Fz6 Fazer Today's instructions will allow you to replace the coolant in the engine of the Yamaha FZ6 Fazer. First, place the motorcycle on a stand and start un…
Fz6 Fazer In this video tutorial, you will see how to remove and replace the engine spark plugs on a 2007 Yamaha FZ6 Fazer in simple and quick steps. First, dr…
Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos