Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's instructions will allow you to replace the coolant in the engine of the Yamaha FZ6 Fazer. First, place the motorcycle on a stand and start unscrewing the radiator cap; then disconnect the main hose from the cooling circuit, allowing the fluid to drain into a container for about ten minutes, as shown in the video. Now reconnect the hose and top up with the new antifreeze, of the correct type (suitable for your radiator); start the engine and top up again if necessary!

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …
How to Replace the Coolant in the Yamaha FZ6 Fazer
How to Replace the Coolant in the Yamaha FZ6 Fazer
Fz6 Fazer This guide shows you how to drain and refill the engine coolant of the Yamaha FZ6 Fazer motorcycle. First, place the bike on its centre stand and sta…
Replacing Air Filter on Yamaha FZ6 Fazer
Replacing Air Filter on Yamaha FZ6 Fazer
Fz6 Fazer In this video, you will learn how to remove and replace the engine air filter on a Yamaha FZ6 Fazer, which is also valid for the FZ6. First, remove t…

How to Change the Engine Oil on a Beta RR 125?

To change the engine oil on a Beta RR 125, loosen the drain plug located at the bottom centre of the bike. Once removed, collect all the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter next to the drain plug to replace it with a new part. Now, refill by adding the necessary amount of oil through the hole on the right side of the engine casing.

Watch the video!


by ScegliAuto

More videos