Do it yourself
Frequently asked questions about cars and motorcycles
On board the Beta RR 125, first of all, you will need to loosen the bolt that tightens the fixing ring connecting the exhaust to the remaining part of the exhaust pipe: once the ring has been removed, you can then loosen the bolts fixing the exhaust to its support on the top. At this point, the old exhaust terminal can be completely removed and the new one positioned: the new terminal will be fixed to the supports with the appropriate bolts and must be connected to the exhaust pipe by inserting the connecting clamp.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 To replace the exhaust of the Beta RR 125, you need to loosen the screws that secure the side panel located near the rear fender. Once the panel scre…
Rr 125 The procedure for replacing the exhaust on the Beta RR 125 is done by loosening the screw located on the rear side of the motorcycle, which secures t…
Rr 125 To replace the exhaust on a Beta RR 125, loosen the screw at the rear side of the bike that secures the exhaust to its housing at the top. Once the s…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos