Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the exhaust pipe of the Beta RR 125, you will need to loosen the fastening screws that hold it in place in its housing: these screws will be located near the fender on the right side and should be loosened after removing the corresponding panel. Once this panel has been removed, you can loosen the screws of the supports and widen the ring that secures the exhaust pipe to the corresponding exhaust manifold: then you can insert the new replacement piece, securing it and checking that everything works.

Posted on 8 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 To replace the exhaust on a Beta RR 125, loosen the screw at the rear side of the bike that secures the exhaust to its housing at the top. Once the s…
Rr 125 Unscrew the bolt that holds the seat at the rear and remove it. Then unscrew the bolt that secures the left side panel and remove that as well. Using…
Rr 125 In this brief and simple guide, discover the steps to dismantle and remove the DB killer or silencer from the exhaust terminal of the Beta RR 125 end…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos