Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Beta RR 125, first, remove the bolt that secures the fixing ring, which connects the exhaust to the rest of the exhaust pipe. Once the ring is removed, you can unscrew the bolts that secure the exhaust to the corresponding bracket at the top. At this point, the old exhaust terminal can be completely removed, and the new one can be positioned. The new exhaust will be secured to the brackets with the appropriate bolts and must be connected to the exhaust pipe with the designated ring.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 In order to replace the exhaust pipe of the Beta RR 125, you need to loosen the screws of the supports that fix the exhaust terminal to its housing l…
Rr 125 To replace the exhaust on a Beta RR 125, loosen the screw at the rear side of the bike that secures the exhaust to its housing at the top. Once the s…
Rr 125 To replace the exhaust of the Beta RR 125, you need to loosen the screws that secure the side panel located near the rear fender. Once the panel scre…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos