Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 500x
Part: Spark plugs

Today, we will see in this short and simple guide how to remove and replace the spark plugs on the Honda CB 500X. First, place your motorcycle on the centre stand and begin by removing the rider's seat; then remove the side plastic fairings by unscrewing the fixing bolts, as shown in the video. At this point, unscrew the bolts of the fuel tank to access the spark plugs; remove their connectors and use a socket spanner with an extension to unscrew and remove them. Install the new spark plugs, ensuring they are the correct type and have the same thread pitch, then reassemble everything!

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Honda CB 500X
How to Replace the Air Filter on a Honda CB 500X
Cb 500x This guide shows you the procedure to remove and replace the air filter on a Honda CB 500X. First, place your motorcycle on a stand and start by remo…
How to Replace the Rear Headlight Bulb on the Honda CB 500X
How to Replace the Rear Headlight Bulb on the Honda CB 500X
Cb 500x In today's tutorial video, you will see the instructions to remove and replace the rear headlight bulb on the Honda CB 500X. First, place your motorc…
How to adjust the clock of the Honda CB 500X
How to adjust the clock of the Honda CB 500X
Cb 500x Today we will explain how to adjust the clock on a Honda CB 500x motorcycle produced from 2019 to 2022 autonomously. We start by changing the time by…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos