Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cb 650 R
Part: Engine oil

Today, discover the procedure for performing the routine maintenance service by replacing the engine oil and oil filter on the Honda CB 650 R motorcycle. First, place your motorcycle on a stand and begin to unscrew the oil drain bolt located on the sump, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and install the new one (screw it in by hand and then tighten gently). Now unscrew the filler cap and top up with the new engine oil as specified in the owner's manual!

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cb 650 R In this tutorial, we can see how to replace the engine oil in the Honda CB650R, a very simple and quick operation. First of all, let's make sure that…
Cb 650 R In this tutorial we can see how to replace the engine oil in the Honda CB650R, an extremely simple and fast operation. First of all, make sure that t…
Cb 650 R This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, plac…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos