Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 300r
Part: Engine oil

As shown in this tutorial, changing the engine oil in the Honda CBR 300 is a straightforward and quick task. First, ensure the engine is cool enough to work safely. Then, open the filler cap, position a container underneath the bike, and using a 12mm socket, unscrew the drain bolt. Allow the oil from the system to drain out, remove the lower right fairing, and open the filter housing. Finally, insert the replacement filter, reassemble everything, and pour in the new oil through the designated opening.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock on the Honda CBR 300 R?
How to adjust the clock on the Honda CBR 300 R?
Cbr 300r In this tutorial we can see how to adjust the time on the Honda CBR 300 R, an extremely simple and quick operation, to be carried out for example aft…
How to replace the headlight bulb of a Honda CBR 300?
How to replace the headlight bulb of a Honda CBR 300?
Cbr 300r To replace the headlight bulb on a Honda CBR 300, start by turning the handlebars in the opposite direction of the side where you need to replace the…
How do you replace the exhaust pipe of the Honda CBR 300R?
How do you replace the exhaust pipe of the Honda CBR 300R?
Cbr 300r The exhaust pipe of the Honda CBR 300R can be replaced by loosening the screws that fix the corresponding exhaust terminal to its housing, so that it…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos