Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyres on a Honda HR-V

Model: Honda Hr V RU, MK 2 - Years 2016-2022
Part:

On the Honda HR-V, the tyre pressure warning light/TPMS usually only turns off after restoring the tyres to the correct pressure and initiating the system calibration. First, check and adjust the pressure of all four tyres according to the values indicated on the vehicle's label (usually on the door pillar). If you have just inflated or changed a tyre, also ensure there are no slow leaks (valve, nails, cracks). At this point, enter the vehicle, turn the ignition to ON (or start the engine), and open the vehicle settings menu from the display/instrumentation. Look for the option dedicated to TPMS (it may be called “TPMS”, “TPMS Calibration”, “Initialisation”, “Reset”, or similar) and confirm the start of the procedure when prompted. After calibration, take a short normal drive: the system needs some time to “relearn” the references. If the light remains on after a drive, recheck the pressures and ensure there is no sensor anomaly or a wheel with pressure still out of tolerance.

Posted on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Hr V (2016-2022 / RU, MK 2) To reset the tire pressure warning light on the Honda HR-V, you need to inflate the tires until they reach the correct pressure value: this value is …
Honda Hr V (2016-2022 / RU, MK 2) Today we will learn how to reset the tire pressure warning on the Honda HR-V; before performing the reset and recalibration of the TPMS sensors, it i…
Honda Hr V (2016-2022 / RU, MK 2) In this very short tutorial, you will see how to reset the tyre pressure light on a Honda HR-V, model produced from 2016 to 2020. Start by turning on…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos