Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wheel on the Honda Jazz 3

Model: Honda Jazz MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

In today's video, you will see how to remove and replace the wheel with the spare on the third generation Honda Jazz, as well as the Civic and generally all vehicles. First, gather all the necessary materials for the wheel replacement, including the jack, the wheel, and the wheel nut wrench; then lift the vehicle with the jack and remove the wheel (in this case, the rear one). Next, insert the spare wheel, tightening the nuts in a criss-cross pattern; finally, reposition everything in the boot.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Fit a Spare Wheel in the Boot of a Honda Jazz That Didn't Come with One
How to Fit a Spare Wheel in the Boot of a Honda Jazz That Didn't Come with One
Honda Jazz (2013-2019 / MK 3) In this video, an interesting DIY for a Honda Jazz that originally had a puncture repair kit. The owner was not satisfied with this solution and want…
How to Replace the Cabin Filter of the Honda Jazz 2
How to Replace the Cabin Filter of the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) If you own a second-generation Honda Jazz (year 2008-2013) and want to learn how to replace the cabin air filter, simply follow these instructions an…
Where to Find the OBD Port on the 2018 Honda Jazz
Where to Find the OBD Port on the 2018 Honda Jazz
Honda Jazz (2013-2019 / MK 3) If you intend to connect to the ECU of your Honda Jazz third generation (2018), but do not know where the OBD port is located to connect the diagnost…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos