Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Honda Ridgeline?

Model: Honda Ridgeline MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shocks

See other generations:
Video tutorial

To replace the front shock absorber on a Honda Ridgeline, lift the vehicle so that the wheel corresponding to the shock absorber to be removed is not in contact with the ground. Next, loosen the bolts that secure the wheel to remove it, providing access to the components behind it. Here, you can remove the bolt that secures the bottom of the shock absorber to the axle; the bolt at the top can be accessed by opening the hood.

Once the two mounting bolts are removed, you can slide out the old shock absorber and replace it with a new one.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Honda Ridgeline
How to Replace the Headlight Bulb on a Honda Ridgeline
Honda Ridgeline (2005-2014 / MK 1) To replace the headlight bulb on a Honda Ridgeline, open the hood to access the inside of the corresponding headlight. Next, remove the circular cove…
How to Replace the Cabin Fan on the Honda Ridgeline
How to Replace the Cabin Fan on the Honda Ridgeline
Honda Ridgeline (2005-2014 / MK 1) Today, let's go through the steps to remove and replace the cabin fan motor on the Honda Ridgeline, following the instructions below. First, get insi…
How to Remove the Rear Fender on a Honda Ridgeline?
How to Remove the Rear Fender on a Honda Ridgeline?
Honda Ridgeline (2016-2024 / MK 2) To remove the rear fender on a Honda Ridgeline, detach the trim located at the top of the fender along its entire length. Once this is removed, you c…

How to unlock the radio of the Iveco Daily

When an Iveco Daily displays the radio error message or prompts to enter the radio code, it means you need to enter the unlock code to resume using the radio. This situation occurs after replacing or disconnecting the vehicle's battery. Enter the unlock code, which can be found in the vehicle's user manual or calculated through the "radio code" website. Input the code using the numeric buttons and then confirm by pressing the OK button. Once this is done, turn off and then turn on the ignition.

Watch the video!


by ScegliAuto

More videos