Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Ridgeline
    4. : How to mount a kit of led lights for the cockpit of the Honda Ridgeline

Honda Ridgeline - Video tutorial

Model: Honda Ridgeline MK 2 - Years 2016-2023
Part: Interior lights ceiling light bulb
Operation: How to mount a kit of led lights for the cockpit of the Honda Ridgeline

If we want to customize our car by inserting a kit (after market) of led lights for the passenger compartment, we proceed as follows: use a small screwdriver to pry and extract the cover of the courtesy light when the door is open. Remove the lamp and mount the LED one, carry out the same steps for the lights of all four doors. Then proceed to unhook the glass from the ceiling light placed on the car roof and replace the lamp with the equivalent LED. We can also replace the spotlights that illuminate the rear license plate.


Posted on 6 May 2024 by ScegliAuto



How to disassemble the rear bumper of the Honda Ridgeline
Honda Ridgeline (2005-2014 / MK 1) We see in this guide the instructions necessary for the disassembly and replacement of the rear bumper of the Honda Ridgeline. First of all, let's mo
How to change the color of the Honda badge and Ridgeline name on a Honda Ridgeline
Honda Ridgeline (2016-2023 / MK 2) If we had one stereotype it was that Americans loved chrome trim. Instead we can say that this is not true, because the videos in which Americans wan
How to replace the cabin filter in the Honda Ridgeline?
Honda Ridgeline (2005-2014 / MK 1) In this tutorial we can see how to replace the cabin air filter in the Honda Ridgeline, a very simple and fast operation. The first thing to do, sinc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos