Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Honda BR-V

Model: Honda Br V DG3 - Years 2021-2026
Part: Brake pads

To replace the front brake pads on a Honda BR-V, lift the front of the vehicle so that the corresponding wheel is off the ground. Remove the wheel from its hub to access the caliper located at the back. Disconnect the caliper from the brake rotor by loosening the bolts that secure it, allowing you to extract the old pads inside. Insert the new pads into the caliper, which should then be secured to the rotor using the appropriate bolts.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on the Honda BR-V
How to Replace the Serpentine Belt on the Honda BR-V
Honda Br V (2016-2021 / DG1, DG2) In this brief and simple guide, you will see the steps to remove and replace the serpentine belt on the Honda BR-V. First, lift the vehicle and remov…
How to Replace the Battery in a Honda BR-V
How to Replace the Battery in a Honda BR-V
Honda Br V (2016-2021 / DG1, DG2) Follow this guide for the main steps to remove and replace the battery in a Honda BR-V. First, open the hood of your car and start loosening the two …
How to Replace the Air Filter in the Honda BR-V?
How to Replace the Air Filter in the Honda BR-V?
Honda Br V (2016-2021 / DG1, DG2) In this tutorial, you will see how to replace the air filter in the Honda BR-V, a very simple and quick task. Before proceeding, ensure that the engi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos