Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Honda CR-V

Model: Honda CR-V MK 5 - Years 2017-2022
Part:

In the Honda CR-V, after restoring the correct tyre pressure following, for example, a puncture, you need to manually reset the warning light and perform a calibration. Let's see how to proceed in this tutorial. First, turn on the instrument panel, not the engine, and enter the settings menu using the touch screen. At this point, select "vehicle" and then "TPMS Calibration", and confirm. Finally, wait for the procedure to complete, and for further confirmation, turn off and then turn on the instrument panel again.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a 2014 Honda CR-V
How to Reset the Tyre Warning Light on a 2014 Honda CR-V
Honda CR-V (2012-2017 / MK 4) If you want to independently reset the tyre warning light on your fourth generation Honda CR-V (2014), simply follow the brief procedure described in…
How to reset the tyre pressure warning light on the Honda CR-V?
How to reset the tyre pressure warning light on the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To completely clear the tyre pressure warning light that appears on the instrument panel of the Honda CR-V, you need to bring all tyres to the optima…
Resetting the Tyre Pressure Warning Light on a 2012 Honda CR-V
Resetting the Tyre Pressure Warning Light on a 2012 Honda CR-V
Honda CR-V (2012-2017 / MK 4) In this video tutorial, you will learn how to reset the tyre pressure warning light on a 2012 Honda CR-V by following these simple and quick steps. B…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos