Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Honda WR-V

Model: Honda Wr V GL, MK 1 - Years 2017-2024
Part: Brake pads

Lift the vehicle on the passenger side, remove the wheel bolts, and take off the wheel. Using a socket wrench, unscrew the upper bolt that holds the brake caliper and move it aside. Remove the brake pads, place them in the caliper, and use a socket extension to compress the piston until it is flush with the caliper. Take the new pads and install them in place of the old ones. Reattach the brake caliper, tighten the bolt with a socket wrench, put the wheel back on, tighten the bolts, and lower the vehicle.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Honda WR-V
How to Replace the Key Battery of the Honda WR-V
Honda Wr V (2017-2024 / GL, MK 1) Replacing the battery inside the key of your Honda WR-V is very simple. With the following mini guide, you will complete the entire operation in just…
How to Replace the Cabin Air Filter in the Honda WR-V
How to Replace the Cabin Air Filter in the Honda WR-V
Honda Wr V (2017-2024 / GL, MK 1) Today, you will learn how to remove and replace the cabin air filter in the Honda WR-V by following the instructions below. First, get inside the veh…
How to Disassemble the Center Unit of the Honda Wr-V
How to Disassemble the Center Unit of the Honda Wr-V
Honda Wr V (2017-2024 / GL, MK 1) In this video tutorial, you will see the main steps to disassemble and replace the center unit or dashboard of the Honda Wr-V. First, get inside the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos