Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Honda CR-V?

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Service warning light

In this tutorial, you will learn how to reset the service light in the Honda CR-V, a very simple and quick operation. Before proceeding, ensure that you have completed all required scheduled maintenance tasks. Start by entering the cabin and turning on the instrument panel, then repeatedly press the button located to the right of the dashboard until you reach the "Trip B" mileage display. Once this is done, switch off the panel and turn it on again while holding down the same button. Then restart the vehicle and check that the operation was successful.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Honda CR-V
How to reset the service light on the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Following these brief instructions, we will see how to reset the maintenance service light for the oil change on the Honda CR-V. First, get into the …
How to Reset the Service Light on the Honda CR-V?
How to Reset the Service Light on the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) In this tutorial, you will see how to reset the service light on the Honda CR-V, an operation to be performed only after completing all required main…
How to Reset the Oil Service Light on the Honda CR-V?
How to Reset the Oil Service Light on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To reset the Oil Service light on the Honda CR-V, turn the key to the 'on' position without starting the engine. Once the dashboard lights up, press …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos