Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Honda CR-V

Model: Honda CR-V MK 6, RS - Years: 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the tyre pressure light on a Honda CR-V, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, enter the cabin, then insert the key and turn on the ignition.

Next, access the general menu on the touchscreen display, enter "Vehicle Settings", then "TPMS Calibration", and select "Calibrate". At this point, you can restart the vehicle and check that the procedure has been successful.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Honda CR-V?
How to Reset the Tyre Pressure Light on a Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To reset the tyre pressure light on a Honda CR-V, ensure all tyres are inflated to the recommended pressure. Once done, enter the cabin and turn on t…
How to Reset the Tyre Pressure Light in the Honda CR-V?
How to Reset the Tyre Pressure Light in the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) In this tutorial, you will learn how to reset the tyre pressure light in the Honda CR-V, a very simple and quick operation that should be done only a…
Resetting the Tyre Pressure Warning Light on a 2012 Honda CR-V
Resetting the Tyre Pressure Warning Light on a 2012 Honda CR-V
Honda CR-V (2012-2017 / MK 4) In this video tutorial, you will learn how to reset the tyre pressure warning light on a 2012 Honda CR-V by following these simple and quick steps. B…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos