Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Te 300
Part: Shocks

It will be possible to replace the rear shock absorber of the Husqvarna TE 300 by loosening the screws that hold it to its housing: this component will be located between the rear swingarm and the corresponding fender. Once the corresponding fixing screws have been unscrewed, it will be possible to remove the piece from its seat and then insert the new replacement piece: this latter must now be fixed with the respective screws. Once the installation is complete, it will be possible to verify that everything works correctly.

Posted on 18 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear shock absorber of the Husaberg TE 300?
How do you replace the rear shock absorber of the Husaberg TE 300?
Te 300 In order to replace the rear shock absorber of the Husaberg TE 300, you need to loosen the screws that secure the fender panels so that it can be rem…
How do you replace the starter motor of the Husaberg TE 300?
How do you replace the starter motor of the Husaberg TE 300?
Te 300 To replace the starter motor of the Husaberg TE 300, you need to loosen the screws that hold the side panel of the engine cover so that you can acces…
How do you replace the exhaust pipe on the Husaberg TE 300?
How do you replace the exhaust pipe on the Husaberg TE 300?
Te 300 The exhaust pipe present on the Husaberg TE 300 can be replaced by loosening the screws that secure the panel located on the rear side of the fender:…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos