Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gearbox Oil on the KTM SX 85?

Model: Ktm Sx 85
Part: Transmission fluid

Video tutorial

To replace the gearbox oil on the KTM SX 85, you need to loosen the drain plug of the gearbox, which is located below the casing on the right side of the bike: once the plug is unscrewed, you can collect the used oil in a suitably positioned container until it has completely drained out. Now you can top up with the new oil, inserting it through the breather located under the beginning of the exhaust; once the topping up is complete, you will need to start the bike to allow the oil to circulate.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

Sx 85 To replace the engine oil of the KTM SX 85, you need to loosen the drain plug of the oil sump, which is located in the central lower part: once this …
Sx 85 To replace the clutch on a KTM SX 85, start by loosening the bolts that secure the cover on the right side of the bike, allowing it to be removed and…
Sx 85 To dismantle the engine of the KTM SX 85, loosen the screws that secure the engine block to its housing. Once the screws securing the supports are lo…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos