Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch on a KTM SX 85?

Model: Ktm Sx 85
Part: Clutch

Video tutorial

To replace the clutch on a KTM SX 85, start by loosening the bolts that secure the cover on the right side of the bike, allowing it to be removed and giving access to the components below. This will expose the discs that secure the clutch, which can be extracted by unscrewing the fastening bolts.

Once the old clutch has been removed from its housing, insert the new one, securing it with the appropriate bolts; finally, refit the cover by securing it back in place.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Gearbox Oil on the KTM SX 85?
How to Replace the Gearbox Oil on the KTM SX 85?
Sx 85 To replace the gearbox oil on the KTM SX 85, you need to loosen the drain plug of the gearbox, which is located below the casing on the right side of…
How do you disassemble the engine of the KTM SX 85?
How do you disassemble the engine of the KTM SX 85?
Sx 85 To disassemble the engine of the KTM SX 85, it will be necessary to loosen the screws that secure the engine block to its housing: once the screws se…
How to Dismantle the Engine of the KTM SX 85?
How to Dismantle the Engine of the KTM SX 85?
Sx 85 To dismantle the engine of the KTM SX 85, loosen the screws that secure the engine block to its housing. Once the screws securing the supports are lo…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos