Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Husqvarna TC 125

Model: Husqvarna Tc 125
Part: Engine oil

Today we will discover the instructions on how to perform the routine maintenance service by replacing the engine oil of the Husqvarna TC 125 enduro bike in simple and quick steps. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the drain plug from metallic residues, as shown in the video. At this point, unscrew the oil filler cap and top up with the new oil (pouring the correct amount).

Posted on 6 October 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the engine oil of the Husqvarna TC 125?
How do you replace the engine oil of the Husqvarna TC 125?
Tc 125 To replace the motor oil inside the Husqvarna TC 125, you will need to loosen the drain plug of the oil pan, located in the central lower part of the…
How to Replace the Brake Pads on the Husqvarna TC 125?
How to Replace the Brake Pads on the Husqvarna TC 125?
Tc 125 The procedure for replacing the brake pads on the Husqvarna TC 125 is the same for both the front and rear brakes. You will need to loosen the bolts …

How to Replace the Front Headlight Bulbs on a Kawasaki ZX-6R?

In this tutorial, you will learn how to replace the front headlight bulbs on a Kawasaki ZX-6R, a very simple and quick task. First, ensure that the key is not inserted for safety. Next, locate the large rubber cap at the back of the headlight and remove it. Then, disconnect the power connector, unclip the metal retaining clip, and remove the old bulb from the housing. At this point, insert the new bulb, reassemble everything, and if necessary, repeat the process on the opposite side.

Watch the video!


by ScegliAuto

More videos