Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550
Part: Battery

Today's instructions will show us how to disassemble and replace the battery of the Kymco AK 550 scooter, following these simple steps. First, we put the scooter on the center stand and start disassembling and removing the front plastic windshield, unscrewing the fastening screws; we will find the battery compartment on the back, as shown in the video. At this point, we disconnect both battery terminals (positive and negative poles) in order to remove it; then we install the new one, of the correct type and with the same amperage, finally reassembling the windshield!

Posted on 13 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Kymco AK 550 remote control?
How do you replace the battery of the Kymco AK 550 remote control?
Ak 550 In order to replace the battery of the Kymco AK 550 remote control, you need to pry at the top of the device so that you can separate the two halves …
How to Replace the Remote Battery for the Kymco AK 550 Scooter?
How to Replace the Remote Battery for the Kymco AK 550 Scooter?
Ak 550 Replacing the remote battery for the Kymco AK 550 scooter, as shown in this tutorial, is an extremely simple and quick operation. To do this, you wil…
How to Replace the Battery in the Kymco AK 550?
How to Replace the Battery in the Kymco AK 550?
Ak 550 To replace the battery in the Kymco AK 550, loosen the screws securing the front fairing of the bike, just below the windscreen. Once this plastic pa…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos