Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Ak 550
Part: Key

In order to replace the battery of the Kymco AK 550 remote control, you need to pry at the top of the device so that you can separate the two halves that make up the remote control. Once the two parts of the shell have been separated, you will be able to locate the battery inside the remote control so that it can be replaced with a new replacement piece. After the replacement, you can close the device again so that it can be used: you will need to make sure that it works correctly even after the replacement.

Posted on 2 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Ak 550 To replace the battery of the Kymco AK 550 remote control, you will need to pry open the top part of the device so that the remote shell can be opene…
Ak 550 Replacing the remote battery for the Kymco AK 550 scooter, as shown in this tutorial, is an extremely simple and quick operation. To do this, you wil…
Ak 550 As seen in this tutorial, replacing the battery in the Kymco AK 550 scooter remote is an extremely simple and quick task. For this, you will need a r…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos