Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Ak 550
Part: Key

To replace the battery of the Kymco AK 550 remote control, you will need to pry open the top part of the device so that the remote shell can be opened. Once the two parts of the shell are separated, you will be able to locate the battery inside the remote, allowing you to replace it with a new spare part. Once the replacement is done, you can close the device again so that it can be used: you should check that it works correctly with the new battery as well.

Posted on 17 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Ak 550 In order to replace the battery of the Kymco AK 550 remote control, you need to pry at the top of the device so that you can separate the two halves …
Ak 550 Replacing the remote battery for the Kymco AK 550 scooter, as shown in this tutorial, is an extremely simple and quick operation. To do this, you wil…
Ak 550 As seen in this tutorial, replacing the battery in the Kymco AK 550 scooter remote is an extremely simple and quick task. For this, you will need a r…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos