Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550
Part: Key

Replacing the remote battery for the Kymco AK 550 scooter, as shown in this tutorial, is an extremely simple and quick operation. To do this, you will need a small flat-head screwdriver and a replacement CR2450 battery. First, locate the slot on the top edge, then pry it open and separate the two halves of the remote. Next, unlock the small internal panel, remove the old battery, and insert the replacement battery in the correct orientation. Finally, reassemble everything by following the reverse procedure.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Kymco AK 550 Scooter Remote?
How to Replace the Battery of the Kymco AK 550 Scooter Remote?
Ak 550 As seen in this tutorial, replacing the battery in the Kymco AK 550 scooter remote is an extremely simple and quick task. For this, you will need a r…
How do you replace the battery of the Kymco AK 550 remote control?
How do you replace the battery of the Kymco AK 550 remote control?
Ak 550 In order to replace the battery of the Kymco AK 550 remote control, you need to pry at the top of the device so that you can separate the two halves …
How do you replace the battery in the remote control of the Kymco AK 550?
How do you replace the battery in the remote control of the Kymco AK 550?
Ak 550 To replace the battery of the Kymco AK 550 remote control, you will need to pry open the top part of the device so that the remote shell can be opene…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos