Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the brake pads on the Husqvarna TC 125 is the same for both the front and rear brakes. You will need to loosen the bolts that secure the caliper to the respective disc so that it can be detached and the pads inside can be removed. After removing the old pads, you can insert the new ones and secure the caliper back to the respective disc by inserting the appropriate pins. Once the caliper is positioned, you can perform the same operation for the other wheel.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Husqvarna TC 125?
How do you replace the engine oil of the Husqvarna TC 125?
Tc 125 To replace the motor oil inside the Husqvarna TC 125, you will need to loosen the drain plug of the oil pan, located in the central lower part of the…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos