Do it yourself
Frequently asked questions about cars and motorcycles
In this brief guide, discover how to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna FE 350 enduro bike. First, place your bike on a stand and begin by removing the metal engine protection cover by unscrewing the screws. Next, unscrew the oil drain bolt found on the sump, allowing the oil to drain into a container for about ten minutes, as shown in the video. At this point, clean the small oil filter and unscrew the filler cap, pouring in the appropriate oil!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fe 350 In this short and simple guide, discover how to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna FE 350 enduro …
Fe 350 The following instructions will show you how to perform the routine maintenance oil change on the Husqvarna FE 350 enduro motorcycle. First, place th…
Fe 350 Let’s explore the procedure for performing routine maintenance by changing the engine oil and oil filter on the Husqvarna FE 350S enduro bike. First,…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos