Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the exterior rearview mirror of the Hyundai I30.

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Below, we will discover the instructions and steps that will allow us to disassemble and replace the external rearview mirror of the Hyundai I30. First, let's open the front door of the vehicle and begin removing the triangular plastic cover located behind the mirror; then, we unscrew the fastening screws and disconnect the adjustment electrical connector to pull the mirror out from the outside, as shown in the video.

At this point, we carry out the repair or replacement of the rearview mirror, securing it properly and finally adjusting the glass.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

Removing the Mirror on the Hyundai i30
Removing the Mirror on the Hyundai i30
Hyundai I30 (2007-2012 / MK 1, FD) Do you want to replace the mirror inside the car's wing mirror? Here’s how to remove the mirror from the Hyundai i30. Pry between the edge of the mir…
How to Replace the Wing Mirror on a Hyundai i30
How to Replace the Wing Mirror on a Hyundai i30
Hyundai I30 (2007-2012 / MK 1, FD) In this video tutorial, you will find the main instructions on how to remove and replace the external wing mirror on a first series Hyundai i30. Firs…
Guide to Replace the External Wing Mirror on the Hyundai I30
Guide to Replace the External Wing Mirror on the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) In this short video, see the steps that will allow you to remove and replace the external wing mirror on the first series Hyundai I30, following thes…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos