Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light from a Hyundai i10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Interior dome light bulb

The damaged part to replace will likely be either the fuse or the bulb.
To determine this, open the ceiling light. Start by gently prying it open with a flathead screwdriver through two small rectangular holes on the longer side of the light.
Once this semi-transparent panel is removed, you will immediately see the bulb. Carefully extract it after switching the light off. If the bulb is intact, reposition it and look for the fuse related to that light. It is located in the panel marked 'FUSE', which indicates all the necessary fuses for protecting various instruments. Open the panel and the back will show a diagram that reproduces the connection scheme of the various fuses and the amperage of the fuse, in this case, 10A.
So, simply replace the fuse and test the light.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials
…
Replacement of the third brake light of a Hyundai I10
Replacement of the third brake light of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In today's video, we will see how to replace the bulbs of the third brake light of a Hyundai i10, first generation model produced from 2007 to 2013. …
How to remove the rear bumper on the Hyundai I10?
How to remove the rear bumper on the Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) In this tutorial we can see how to remove the rear bumper on the Hyundai I10, an extremely simple and quick operation. First of all, we open the trun…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos