Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on an Isuzu D-Max

Model: Isuzu Isuzu D Max Rt50, Rt85 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Diesel fuel filter

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the diesel filter on an Isuzu D-Max. First, open the bonnet of the vehicle and start by removing the panel located at the top right by unscrewing the screws; then disconnect the diesel filter pipes and also disconnect the electrical connector, thus removing the filter, as shown in the video.

At this point, replace and install the new diesel filter cartridge, as well as the original one; reassemble and correctly connect the new diesel filter, following the video tutorial to the end!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on an Isuzu D-Max
How to Replace the Fuel Filter on an Isuzu D-Max
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) Today, you will learn how to replace the fuel filter on the Isuzu D-Max. The first step is to lift the vehicle off the ground using a jack to gain ea…
How to Change the Air Filter of the Isuzu D-max
How to Change the Air Filter of the Isuzu D-max
Isuzu Isuzu D Max (2011-2019 / MK 2) Today, in this brief and simple guide, you will learn how to remove and replace the engine air filter of the Isuzu D-max. First, open the bonnet and …
How do you replace the cabin filter of the Isuzu D-Max?
How do you replace the cabin filter of the Isuzu D-Max?
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) In order to replace the cabin filter on the Isuzu D-Max, you need to open the glove compartment on the passenger side, releasing the pins that hold i…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos