Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Jeep Renegade?

Model: Jeep Renegade - Years 2014-2023
Part: Service warning light

Before starting this procedure, it will be necessary to have actually carried out the scheduled maintenance by the manufacturer. To reset the "Service" light on a Jeep Renegade, it is necessary to connect a diagnostic device to the OBD port, located under the dashboard on the driver's side. Once connected, turn on the instrument panel without starting the engine and access the menu of the device. Navigate through the options until you find the section dedicated to maintenance or service intervals. Follow the instructions provided by the device to start and complete the reset of the light. After performing the procedure, turn off the instrument panel and turn it back on to verify that the light has been properly eliminated.

Posted on 2 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the Service Light on a Jeep Renegade?
How to Reset the Service Light on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Service light on a Jeep Renegade, turn the ignition key to power on the instrument cluster and check for the maintenance light. Press an…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster by turning the key in the ignition b…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos