Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrument cluster.

Next, using the selection button, select the "Oil Change Required" option. Once done, press the accelerator pedal three times.

This will automatically turn off the "Service" light. When the "Service" light on your Jeep Renegade has turned off, you can release the pedal, and you will have successfully completed the reset.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Renegade?
How to Reset the Service Light on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Service light on a Jeep Renegade, turn the ignition key to power on the instrument cluster and check for the maintenance light. Press an…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Start by ensuring that the service has been completed, then sit in the driver's seat of your Jeep Renegade. Once seated, press the ignition button on…

Other guides you may be interested in

Where is the Battery Located in a Toyota RAV4 Hybrid?

In this video, see where the battery is located in a Toyota RAV4 Hybrid, useful in case you need to replace it or perform an emergency start. As shown, it is positioned at the rear of the vehicle, specifically at the base of the right wall of the boot. To access it, first remove the floor panel, then disassemble the right drawer and subsequently the small glove compartment. To remove it, simply unscrew the two bolts of the upper bracket and disconnect both terminals, always starting with the negative.

Watch the video!


by ScegliAuto

More videos