Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Renault Kangoo

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Body

See other generations:
Video tutorial

In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local garage to achieve this.

He mentions going towards the passenger door, as this is a right-hand drive vehicle. Naturally, for left-hand drive vehicles, the door is that of the driver.

Pull the lever located on the side towards you to release the bonnet. To open it, lever from the centre of the bonnet outwards, which is somewhat the opposite of how most bonnets open.

In front of the driver, on the grille, there is a black rubber cap. Here you can add the washer fluid.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to open the hood of a Renault Kangoo
How to open the hood of a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this very short video tutorial, we will see how to open the hood of the engine compartment of a Renault Kangoo, second series model. First, we nee…
How to Open the Bonnet of the Renault Kangoo 2024
How to Open the Bonnet of the Renault Kangoo 2024
Renault Kangoo (2020-2026 / MK 3, KFK, FFK) .. Let's see how to open the bonnet of the Renault Kangoo 2024: sit in the driver's seat and locate the release lever,.. …
How to open the hood of the Renault Kangoo
How to open the hood of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In a few simple steps, we will see how to open the hood of the Renault Kangoo, following the instructions below. First, open the front door on the dr…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos