Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Checks and maintenance

In a few simple steps, we will see how to open the hood of the Renault Kangoo, following the instructions below. First, open the front door on the driver's side and start pulling the hood release lever located at the bottom, next to the pedals; then move to the front of the vehicle and release the hood latch located between the hood and the grille, in the middle, as shown in the video. At this point, lift the hood and secure the rod to lock it, finally lowering the hood to close it!

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to open the hood of a Renault Kangoo
How to open the hood of a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this very short video tutorial, we will see how to open the hood of the engine compartment of a Renault Kangoo, second series model. First, we nee…
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
Fuse Diagram and Location for the Renault Kangoo
Fuse Diagram and Location for the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this guide, we will discover information regarding the diagram and location of the fuse boxes for the Renault Kangoo. First, open the driver's sid…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos