Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this very short video tutorial, we will see how to open the hood of the engine compartment of a Renault Kangoo, second series model. First, we need to open the driver's side door and pull the hood release lever located under the dashboard as shown in the video, then we lift the front hood slightly and insert a hand between the hood and the bumper to find the release lever, once found, push it and at the same time lift the hood completely, finally, secure it with the rod located on the right side of the engine compartment.


Posted on 14 May 2025 by ScegliAuto


Related tutorials

How to open the hood of the Renault Kangoo
How to open the hood of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In a few simple steps, we will see how to open the hood of the Renault Kangoo, following the instructions below. First, open the front door on the dr…
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
Fuse Diagram and Location for the Renault Kangoo
Fuse Diagram and Location for the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this guide, we will discover information regarding the diagram and location of the fuse boxes for the Renault Kangoo. First, open the driver's sid…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos