Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Kangoo
    4. : How to remove the starter motor of a Renault Kangoo

Renault Kangoo - Video tutorial

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Starter motor
Operation: How to remove the starter motor of a Renault Kangoo

Before starting, we will have to open the front hood of our Renault Kangoo. Let's start by disassembling and removing all the sleeves and the air filter block, unscrewing the relative fixing bolts. Next, we will have to unscrew and remove the bolts that secure the starter motor to the engine block. By doing so, we will have freed the starter itself. Let's proceed by disconnecting the relative electric plug. At this point, we will have to extract and remove the motor from the engine compartment of our Renault Kangoo. When we have removed it, we will have completed the disassembly.


Posted on 27 February 2024 by ScegliAuto



Replace the starter motor on Renault Kangoo
Renault Kangoo (1997-2008 / KW, KC, MK 1) Removing the starter motor on a Renault Kangoo? Let's see how the engine compartment is removed from inside. We open the car door and pull up the eng
Service reset on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) After changing the motor oil in our vehicle, it is also necessary to reset the corresponding service light. In today's tutorial, we will be shown how
How to reset the service light on Renault Kangoo.
Renault Kangoo (1997-2008 / KW, KC, MK 1) Manually resetting the service light on your Renault Kangoo first generation (year 1997-2008) is really very simple and we will help you step by step

Other guides that may interest you

    Frequently Asked Questions

    • Kangoo 2007-2021 - Where is the starter motor located in the Renault Kangoo? Read Answer
    • Kangoo 1997-2008 - Where is the starter motor Renault Kangoo? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos