Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the starter motor in a Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Starter motor

If you are worried about your car, know that changing the starter motor is not complicated but it requires a bit of skill. Disconnect the battery to avoid short circuits. The starter motor is usually located near the gearbox, unscrew the bolts and disconnect the cables marking where they go. Maybe spray some lubricant if they are stuck. Remove the old starter motor, put in the new one and reconnect everything as before. Tighten the bolts well and reattach the battery. Now try to start it, if it starts well you have done a great job. Otherwise, check the connections again. Or contact a trusted workshop.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Starter Motor on a Renault Kangoo
Replace the Starter Motor on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Removing the starter motor from a Renault Kangoo? Here’s how to take it out from the engine bay. Open the car door and pull up the engine bay release…
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
How do you replace the starter motor of the Renault Kangoo 1.5 dci?
Renault Kangoo (2007-2021 / MK 2, FC, FW) As easy to understand, the starter motor of a car is located in the engine compartment, including the Renault Kangoo 2008. In order to replace it, we…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 1997-2008 - Where is the starter motor Renault Kangoo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos