Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Starter Motor on a Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Starter motor

Removing the starter motor from a Renault Kangoo? Here’s how to take it out from the engine bay. Open the car door and pull up the engine bay release lever located at the bottom left, then lift the bonnet. Disconnect the battery terminals using a socket spanner, and remove the trim pieces to access the starter motor. Unscrew the securing bolts and extract the unit from the engine bay. Install a new starter motor and secure the bolts, then reconnect the electrical terminals. Refit all previously removed components in the engine bay. Test the operation of the starter motor.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
How do you replace the starter motor of the Renault Kangoo 1.5 dci?
Renault Kangoo (2007-2021 / MK 2, FC, FW) As easy to understand, the starter motor of a car is located in the engine compartment, including the Renault Kangoo 2008. In order to replace it, we…
How do you remove the starter motor of the Renault Kangoo diesel?
How do you remove the starter motor of the Renault Kangoo diesel?
Renault Kangoo (1997-2008 / MK 1, KC, KW) The electrical component mentioned here, the starter motor of the Renault Kangoo diesel, the car shown in the video, does not necessarily have to be …

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 1997-2008 - Where is the starter motor Renault Kangoo? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos