Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the starter motor of the Renault Kangoo 1.5 dci?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Starter motor

As easy to understand, the starter motor of a car is located in the engine compartment, including the Renault Kangoo 2008. In order to replace it, we must first lift the hood, then, with the instrument panel off, proceed to disconnect the two electrical power cables, and finally remove the two fixing pins. At this point, it is removed from its seat and for the installation of the new starter motor, we just need to proceed in reverse, then we will fix it with its pins and reconnect the cables that power it electrically.

Posted on 3 October 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
How do you replace the starter motor in the Renault Kangoo 1.5 dci?
How do you replace the starter motor in the Renault Kangoo 1.5 dci?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video, well done and complete with verbal commentary, the exact procedure for replacing a starter motor of a car is explained step by step, w…
Wiring Diagram for Renault Kangoo 1.5 dCi
Wiring Diagram for Renault Kangoo 1.5 dCi
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video, you can see the wiring diagram for the Renault Kangoo 1.5 dCi: the diagram shows the path of the wires, the colour of the wires, and t…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 1997-2008 - Where is the starter motor Renault Kangoo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos