Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the starter motor in the Renault Kangoo 1.5 dci?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Starter motor

In this video, well done and complete with verbal commentary, the exact procedure for replacing a starter motor of a car is explained step by step, whatever the car may be, the principle is the same. It starts with disconnecting the power cables of the battery for added safety, then positioning the jack and lifting the front of the car, in order to access underneath the engine, where it will be easier to do the work. After disconnecting the power cables of the starter motor, the locking bolts are unscrewed, preferably with a swivel key. All that remains is to remove it from its seat and install the new one in the reverse procedure.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the starter motor of the Renault Kangoo 1.5 dci?
Renault Kangoo (2007-2021 / MK 2, FC, FW) As easy to understand, the starter motor of a car is located in the engine compartment, including the Renault Kangoo 2008. In order to replace it, we…
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
Replace the Starter Motor on a Renault Kangoo
Replace the Starter Motor on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Removing the starter motor from a Renault Kangoo? Here’s how to take it out from the engine bay. Open the car door and pull up the engine bay release…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 1997-2008 - Where is the starter motor Renault Kangoo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos