Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Renault Kangoo 1?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Air filter

Let's see together with the protagonist of this video how to change the air filter in a first-phase Renault Kangoo (produced between 1997 and 2008). After safely parking and lifting and securing the engine compartment lid, proceed to remove the entire air filter housing block, after removing the various screws and disconnecting the air intake hose. Now open the filter box, remove the filter element, and give it a good clean before inserting the new filter and reinstalling everything.

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Renault Kangoo 1.2
How to Replace the Air Filter on the Renault Kangoo 1.2
Renault Kangoo (1997-2008 / MK 1, KC, KW) In today's tutorial, you will learn how to remove and replace the engine air filter on the Renault Kangoo 1.2. First, open the bonnet of your car and…
Procedure to Replace the Air Filter on a Renault Kangoo
Procedure to Replace the Air Filter on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this video tutorial, you can see the procedure to replace the air filter on a Renault Kangoo, following a few simple steps: the first thing to do …
How to Replace the Cabin Filter on the Renault Kangoo
How to Replace the Cabin Filter on the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) If you own a first-generation Renault Kangoo (1998-2008) and want to learn how to replace the cabin air filter, read this guide carefully and follow …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos