Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Kangoo
  6. : The procedure to replace the air filter on Renault Kangoo

Renault Kangoo - Video tutorial

Model: Renault Kangoo KW, KC, MK 1 - Years 1997-2008
Part: Air filter
Operation: The procedure to replace the air filter on Renault Kangoo

In this video tutorial we can see the procedure to replace the air filter on Renault Kangoo, following some simple steps: the first thing to do is to buy a new air filter. Next step we have to lift the engine hood and secure by means of a rod. Disconnect the ventilation tube, unscrew the clamp securing the engine air filter housing to the throttle body using a flat screwdriver. Remove the filter housing, disconnect the air inlet hose from the air filter housing; loosen the fixing screws of the air filter cover with a Torx T25 wrench; remove the filter cover and remove the old filter element, clean the filter housing and seat the new filter element in place.


Posted on 31 August 2022 by ScegliAuto



How to replace the cabin filter in a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The video explains how to replace the cabin air filter (or pollen filter) in a Renault Kangoo. The filter box is located near the passenger's feet an
How to replace the air filter on Renault Kangoo 1.2
Renault Kangoo (1997-2008 / KW, KC, MK 1) In today's video tutorial we will see the guide on how to disassemble and replace the engine air filter of the Renault Kangoo 1.2. First we open the
How to replace the air filter of the Renault Kangoo 2006.
Renault Kangoo (1997-2008 / KW, KC, MK 1) In this new mini guide dedicated to all of you who own a Renault Kangoo first series (year 1997-2008), we will explain the steps to follow if you wan

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos