Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Recalibrate the Throttle Body on the Renault Kwid?

Model: Renault Kwid MK 1 - Years 2015-2024
Part: Throttle body

In this tutorial, you will see how to recalibrate the throttle body on the Renault Kwid, a very simple and quick operation to perform as a troubleshooting step. First, enter the cabin, then insert the key and leave it in the initial position. Press the accelerator pedal and turn on the instrument cluster at the same time. Keep the pedal pressed, turn off the cluster after five seconds, wait three seconds, and repeat the process two more times. At this point, release the pedal, start the vehicle, and drive a few miles.

Posted on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in the Renault Kwid
Where to Find the Fuse Box in the Renault Kwid
Renault Kwid (2015-2024 / MK 1) In this guide, find the steps to locate the fuse box in your Renault Kwid. Once you have safely parked the vehicle and completely turned it off, go t…
How to Change the Battery in a Renault Kwid
How to Change the Battery in a Renault Kwid
Renault Kwid (2015-2024 / MK 1) If you own a Renault Kwid and need to replace the vehicle's battery, follow this guide step by step. First, park your Renault Kwid safely and turn it…
Where to Find the Fuses in the Renault Kwid
Renault Kwid (2015-2024 / MK 1) Locating the fuses in your Renault Kwid is very simple. Just follow the procedure described in this guide. Before you start, for safety reasons, turn…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos