Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Body on a Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Throttle body

You can replace the throttle body on a Renault Clio by opening the bonnet to access the components in the engine bay: at the front, you will locate the throttle body right by the intake manifold. It needs to be freed from the corresponding screws, the clips connecting it to the intake, and the connectors for its sensors: at this point, it can be cleaned, removed, or completely replaced. It must then be reinstalled and connected correctly, ensuring it functions properly.

Posted on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the Throttle Body of the Renault Clio 1.2
How to Remove and Clean the Throttle Body of the Renault Clio 1.2
Renault Clio (1998-2005 / Clio 2, MK 2) In today's video tutorial, you will see how to remove and clean the throttle body of the Renault Clio with a 1.2 petrol engine. First, open the bonne…
Instructions for Removing the Throttle Body
Instructions for Removing the Throttle Body
Renault Clio (1998-2005 / Clio 2, MK 2) The throttle body is located next to the intake manifold and is connected to the air filter via a U-shaped hose: first, remove the hose, disconnect t…
Deactivating the Passenger Airbag in a Renault Clio
Deactivating the Passenger Airbag in a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) In this useful video tutorial, you can see how to deactivate the passenger airbag in a Renault Clio, whether hybrid or electric of the latest generat…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos