Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Clean the Throttle Body of the Renault Clio 1.2

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Throttle body

See other generations:
Video tutorial

In today's video tutorial, you will see how to remove and clean the throttle body of the Renault Clio with a 1.2 petrol engine. First, open the bonnet and start by removing the plastic protective cover found at the top; then disconnect the intake hose from the throttle body and unscrew the fastening screws to remove it, disconnecting the electrical connector of the throttle position sensor, as shown in the video.

At this point, clean or replace the component, applying the reverse procedure for reassembly!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Throttle Body
Instructions for Removing the Throttle Body
Renault Clio (1998-2005 / MK 2, Clio 2) The throttle body is located next to the intake manifold and is connected to the air filter via a U-shaped hose: first, remove the hose, disconnect t…
How to Replace the Throttle Body on a Renault Clio?
How to Replace the Throttle Body on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) You can replace the throttle body on a Renault Clio by opening the bonnet to access the components in the engine bay: at the front, you will locate t…
Faulty MAP Sensor on a Renault Clio IV
Faulty MAP Sensor on a Renault Clio IV
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, you can see that the MAP sensor on this Renault Clio IV was faulty, as it measured 40°C when the reading was clearly incorrect. Unfort…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos