Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Renault Kangoo 2024

Model: Renault Kangoo KFK, MK 3, FFK - Years 2020-2026
Part: Checks and maintenance

Let's see how to open the bonnet of the Renault Kangoo 2024: sit in the driver's seat and locate the release lever, which is at the bottom left near the brake pedal. Pull the lever until you hear a distinctive "click". Exit the car and approach the bonnet. The second release is not in the centre as it is on many cars: the lever must be found on the left side of the bonnet when looking at the car from the front. Place your fingers under the edge of the bonnet on the left side, push the lever to the left, and lift the bonnet. The Kangoo 2024 has gas struts that hold the bonnet up automatically, so there is no need for a manual support rod. To close it, simply push down gently.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the hood of the Renault Kangoo
How to open the hood of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In a few simple steps, we will see how to open the hood of the Renault Kangoo, following the instructions below. First, open the front door on the dr…
How to open the hood of a Renault Kangoo
How to open the hood of a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this very short video tutorial, we will see how to open the hood of the engine compartment of a Renault Kangoo, second series model. First, we nee…
How to Open the Bonnet of the Renault Kangoo
How to Open the Bonnet of the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local gar…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos