Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How do you reset the Jeep Renegade Service light?

Jeep Renegade - Video tutorial

Model: Jeep Renegade BU, 520, MK 1 - Years 2014-2023
Part: Checks and maintenance
Operation: How do you reset the Jeep Renegade Service light?

In order to reset the Jeep Renegade Service light, you need to turn the ignition key so that the instrument panel can be turned on, checking for the presence of the maintenance light. In order to reset the warning light, it will therefore be necessary to hold down the accelerator pedal and at the same time hold down the brake pedal for about 20 seconds. After this operation it will be possible to switch the instrument panel off and on again: in this way the Service warning light will have been correctly reset and it will be possible to check it at each subsequent ignition.


Posted on 12 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - Where can I find the service coupons for the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What does the 20,000 km service of the Jeep Renegade include? Read Answer
    • Jeep Renegade 2014-2023 - What needs to be replaced during the 60000 km service of the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How much do subsequent maintenance services for the Jeep Renegade cost after the first one? Read Answer
    • Jeep Renegade 2014-2023 - What does the warning light with a steering wheel and an exclamation point indicate in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How do you replace the parking lights on a Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What do error messages indicate in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What does the "RPM" light indicate in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How to open the fuel cap of a Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Why is the start and stop feature of the Jeep Renegade not available? Read Answer
    • Jeep Renegade 2014-2023 - Why is the central display of the Jeep Renegade not working? Read Answer
    • Jeep Renegade 2014-2023 - What to do when the Jeep Renegade indicates start & stop not available? Read Answer
    • Jeep Renegade 2014-2023 - What to do if the 'entry service access' signal does not turn off in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What does the "4wd not available" warning light indicate on the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Why is the panoramic roof of the Jeep Renegade stuck? Read Answer
    • Jeep Renegade 2014-2023 - How do you reset the tire pressure warning light on the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What does the "4WD Serv Unavailable" statement on the Jeep Renegade mean? Read Answer
    • Jeep Renegade 2014-2023 - What does the Jeep Renegade oil light mean? Read Answer
    • Jeep Renegade 2014-2023 - What does the Jeep Renegade tire pressure light mean? Read Answer
    • Jeep Renegade 2014-2023 - What is the problem with the passive entry system of the Jeep Renegade? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos