Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on a 2016 Jeep Renegade

Model: Jeep Renegade - Years 2014-2021
Part: Service warning light

The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be done every certain number of miles. Using the Alfa OBD software, go to the Jeep Renegade menu and scroll to the service reset option. Perform the oil change reset by turning the key to the first click and pressing the accelerator three times. Now reset the service by pressing CONTINUE. At this point, turn off the ignition and start the engine. If the service light remains off, the reset was successful.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Jeep Renegade?
How to reset the service in the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) Resetting the service in the Jeep Renegade, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must ha…
Resetting the Tyre Pressure of a Jeep Renegade
Resetting the Tyre Pressure of a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the tyre pressure warning light of a Jeep Renegade. It is a fairly simple operation that can be done independently in ju…
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos